This post may contain affiliate links. This means that if you click on one of these links, visit the retailer and purchase an item, I may receive a small percentage of your purchase. For more information visit disclaimer
What better way is there to send your Halloween party guests home with candy than with these little Halloween themed party boxes? They are also the perfect way to finish of a table place setting or even for going trick or treating with (as they are quite little it’s a great way to stop the kids from taking too much candy!)
See below my step by step guide on how to make them…
What you will need per box: 2 x A4 card, Scalpel & Ruler or Scissors, Double-sided tape
You can also download and print instructions here
Step 1. Print out the below, free template onto the two pieces of card.
Step 2. Then print out 2 copies of any of the below designs onto the reverse of those pieces of card. You will need to make sure you figure out the correct way to load the card into the printer so that the design ends up the correct way to the template. Perhaps practising on paper first would be best so that you do not waste any card. You will notice the second design I printed onto kraft card, you can, of course, print this onto any colour card you like.
Step 3. Cut out each of the templates and lightly score along the inside fold lines.
Step 4. Fold each of the sides following the lines you have scored, and using double-sided tape stick the two sides together using the small side tabs as shown below (you could use a strong glue if you prefer)
Step 5. Fill with treats, sweets and candy of your choice and there you have it!